Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 Manuel d'utilisateur télécharger pdf (Page 35)

Configuring the Router

3-7

Change the scan delay (see page 3-15)

Enable and disable the alarm (see page 3-16)

Restore the default settings (see page 3-18)

Selecting the Topology

You should be sure that the router’s topology setting is correct for your configuration. You

can set the topology to:

LOOP—use this option for all configurations except when the router is connected to a

switch F-port. See Installation Configuration Examples on page 2-4.

POINT-TO-POINT—use this option only when you connect the router to a switch F-

port. See Installation Configuration Examples on page 2-4.

To select the topology:

From the System Menu, select Configuration Menu and press Enter.

The Configuration Menu screen displays.

Select Host Configuration and press Enter.

The Host Configuration screen displays.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 95 96

Pas de commentaire

Chaparral Fibre Channel -to-SCSI Router Chaparral FS 1310 Manuel d'utilisateur Page 35